NANJING ROADSKY TRAFFIC FACILITY CO., LTD

Product Catalog

Subscriptions

Get mail on new products



Screeding Type Two-Component Road Marking Machine RS14

Item Code:RS14 Features:L*W*H: 1300*900*1200 mm Weight: 158 kg Climbing Ability: ≤18°
  • Description

Introduction
Two-component Screed Road Marking Machine is a new road marking machine with good performance and long service life, equipped with two-component paint.

 

Technical Specification

Model

RS14

Engine

5.5 HP Honda Engine

Driving System

Ultra-quiet hydraulic infinite driving system (HTS)

Climbing Ability

≤18°

Paint Tank Capacity

100 kg

Glass Beads Bin

15 kg

Solidifying Agent Tank 

Capacity

15 kg

Marking Device

Manual Screed Dies

Standard Dies

150/200 mm

Optional Dies

300/400/450 mm

L*W*H

1300*900*1200 mm

Weight

158 kg

 

Features
1. Adopts imported Ultra-quiet infinite hydraulic driving system, can move forward, backward, clutch, stop operating freely.
2. Marking Thickness: 1.2-2.5 mm adjustable
3. Glass beads adopt quantitative formula, without affecting by the marking speed.
4. Solidifying agent and paint are controlled by valves, easy to adjust according to construction requirements.
5. Mixing system adopts mechanical transmission of electromagnetic clutch.

 

Spraying Paint
Two-component Screed Road Marking Paint is a large molecular polymer of network structure, formed by low molecular acrylic polymer and evocating agent. The coating is full, hard, with good stain resistance, wear resistance and good reflective effect, etc. It is a new generation of road marking paint.

Other Products

Product Name:
Road Line Marking Paint Remover
Model:
RS-6A/B
Description:
RS-6B road marking remover have the advantges of strog power, high speed, easy and safe operation, low vibration for repairing and renewing the thermoplastic or cold plastic marking line.
Product Name:
Cold Plastic Paint Road Marking Machine
Model:
RS-5A
Description:
Pressure:10-18Mpa Efficiency:18L/min Spraying width:50-500mm Line thickness:0.2-0.6mm
Product Name:
High Pressure Road Air Blower
Model:
RS7
Description:
High pressure road air blower is mainly applied to the cleaning work before road marking construction.
Product Name:
Hand Push Cold Airless Spraying Two Component Road Marking Machine
Model:
RS12/13
Description:
Marking Width: 50-500 mm Max.Flow Rate: 7 L/Min Working Pressure: 10-15 Mpa
Product Name:
BOOSTER VEHICLE (Car Seat)
Model:
RS11
Description:
Booster vehicle can connect the Hand Push Thermoplastic Road Marking Machine, and make it move forward automatically.
Product Name:
Mechanical Thermoplastic Kettle
Model:
RS-4C-600
Description:
RS-4C-600 Mechanical Thermoplastic Kettle is double tanks thermoplastic kettle.
Product Name:
Road Marking Primer Machine
Model:
RS9
Description:
The primer is used as adhesive material for thermoplastic paint road markings
more